Residential PV

The benefits of solar electricity

• Cut your electricity bills. Sunlight is free, so once you’ve paid for the initial installation, your electricity costs will be reduced.
• Get paid for the electricity you generate. The UK government’s Feed-in tariffs pay you for the electricity you generate, even if you use it.
• Sell electricity back to the grid. If your system is producing more electricity than you need, you can sell the surplus back to the grid.
• Cut your carbon footprint. Solar electricity is green renewable energy and doesn’t release any harmful carbon dioxide or other pollutants. A typical home solar PV system could save over a tonne of carbon dioxide per year – that’s more than 30 tonnes over its lifetime.

How do solar panels (PV) cells work?

Solar PV cells are made from layers of semi-conducting material, usually silicon. When light shines on the cell it creates an electric field across the layers. The stronger the sunshine, the more electricity is produced. Groups of cells are mounted together in panels or modules that can be mounted on your roof.

The power of a PV cell is measured in kilowatts peak (kWp). That’s the rate at which it generates energy at peak performance in full direct sunlight during the summer. PV cells come in a variety of shapes and sizes. Most PV systems are made up of panels that fit on top of an existing roof, but you can also fit solar tiles.

Solar tiles and slates

Solar tiles are designed to be used in place of ordinary roof tiles. A system made up of solar tiles will typically cost around twice as much as an equivalent panel system, although you will save the money you would have spent on roof tiles or slates. Solar tile systems are not normally as cost-effective as panel systems, and are usually only considered where panels are not considered appropriate for aesthetic or planning reasons.

The benefits of solar panels

Reduced Costs – on average, solar PV installations pay for themselves within five years and go on producing free electricity for many years to come.

Reduced Emissions – one of the best ways to significantly reduce your carbon footprint. Even a small solar PV scheme saves tonnes of CO2 every year!

Low Maintenance – with no moving parts and very little ongoing maintenance required, solar panels are incredibly reliable and cost-efficient to run.

Future Proof – with energy prices only set to rise, a solar PV installation protects you from increased utility bills by providing your own free electricity.

5 solar pv panel facts to know before you buy solar

Solar PV panels: they’re all the same, right? Let’s take a walk through the maze of things you have to consider. There’s a bit of unavoidable jargon here, so we promise we’ll lead you out the other side.

Choice is all well and good, but when there are so many Solar PV panels all claiming to be the best, and that’s before you even get to batteries and inverters and other add-ons, it can all be a bit much. No need to worry, though. At Aspire, we test all the claims and uncover all the facts for you. First, a little tidbit to show you how vital good information is to your decision…

Over 20 years, the difference in energy generated between the lowest & highest quality solar panels is 40%.

What to look out for

Many factors affect solar panel performance and durability. Below, we answer common questions and slay a few myths.

All Solar PV panels are made in the same factory, aren’t they?

Definitely not. We’ve seen many different qualities of solar panel come through the UK market and there’s some we’d recommend you definitely avoid, including some from very big household names.  There’s a lot of smoke and mirror tactics used to convince you that certain panels are the best.  We look at the whole market and check all manufacturers’ claims. Here’s our guide on how to become a Solar PV Panel detective.

Fact 1

Mono Solar PV panels are better than Poly…right?

True. Sort of. Mono crystalline panels give you a bit of extra power per square metre, but there are many other factors that affect performance. So, a good quality Poly solar panel will generate more than a poor-quality Mono.

Poly crystalline: This technique uses fragments of silicon crystal melted together. Poly is an older technology, cheaper to produce and has a blue shade to it. Because there are edges where the crystal fragments meet, there are small areas that are not perpendicular to the light hitting the panel, meaning they don’t absorb energy, resulting in slightly reduced efficiency.

Mono crystalline: With Mono, wafers cut from a single ‘ingot’ of silicon crystal, making the surface of the crystal flatter. Light hitting the panel is therefore perpendicular to the surface. This increases efficiency, allowing you to have more power in a smaller area.

Fact 2

Ignore ‘kWp’. Check ‘kWh’.

Solar PV panels are sized in kWp (kilo watts peak) which refers to their performance under STC (Standard Test Conditions). However, you need kWh (kilo Watt hours = units of electrical energy) as the more kWh your system generates the bigger the impact on your bills.  So what affects solar panel performance in conditions outside of STC?

Low light level performance: When the light level drops, better quality panels will maintain more power. This is affected by the quality of the silicon and the clarity of the glass.

Temperature co-efficient: Everything electrical increases in resistance the hotter it gets. Increased resistance means reduced efficiency. PV Panels with a lower temperature co-efficient are affected less by increases in temperature and are more efficient.

Heat capacity: If a Solar PV panel can dissipate heat better it will give better results at high temperatures. So even if a panel has a good temperature co-efficient, it may perform badly if it can’t dissipate heat effectively.

Fact 3

Cell technology

Invented and patented by SunPower, Maxeon technology is the most advanced type of solar cell available today. SunPower’s entire range Maxeon range of Solar PV panels are the only panels on the market available with Maxeon’s copper backed technology.

Fact 4

How long will Solar PV panels last?

Over time, all solar panels lose some of their power. An average silicon crystalline panel will lose about 15% of its power over 25 years in a typical UK climate. However, this can vary between panels and through installation methods.

Maxeon technology cells are the most durable.  Independent testing shows they’ll lose just 2.5% of their power over 25 years.  The diagram above shows the main causes of power loss.

Corrosion: Even panels manufactured to the highest quality will eventually let in some moisture under the glass and weather seals. And for those with fragile thin strips of aluminium across the front of the cells, it doesn’t take much corrosion to break the connections that carry the sun’s energy to your system.

Interconnection breaks: Changes in temperature expand and contract the aluminium connections between cells. Over time it will stress them. Along with corrosion, eventually some connections will break, adding resistance to the conductivity in a panel, which decreases the amount of power a panel can generate.

Fact 5

Can I trust my Solar PV panel warranty?

Solar panels come with two different warranties: performance and product.

Product warranty: This guarantees against any manufacturing defects, i.e. physical faults with the panels.  Mostly 10-25 years long, these warranties usually offer a replacement panel or refund the cost of a replacement panel but don’t cover scaffold, installation or the investigation to find the fault in the first place, which can be the most expensive part of all.

The exception (again) is Sunpower, who offer a 25-year product warranty covering the full cost of replacement, including sending a replacement panel, labour and scaffold or other access requirements.

Performance warranty: Sometimes called degradation warranties, these guarantee how much power a Solar PV panel will retain after 25 years.  All warranties promise their panels will retain at least 80% of their power after 25 years.  Some manufacturers offer better warranties that guarantee more than 90% of their power after 25 years.  Check the panels datasheet for details.

Guaranteed for 25 years?  Beware of ’25-year warranties’ as some Solar Sales people point to the 25-year degradation/performance warranty, while the product warranty may only be 10 years.  If you have a ‘degradation’ issue in year 11, you may find the manufacturer blames the product, which is now out of warranty.

Other degradation: The remaining issues that cause degradation are much smaller but still contribute to the overall loss of power from panels. These are less prominent in better quality panels which have better quality components and sealants.